Decide what problem you are solving
Filters do different jobs. A carbon filter reduces chlorine taste and odor and some organic compounds. A sediment filter catches particles. Reverse osmosis removes a wider range of dissolved substances but wastes some water and needs a drain connection.
Write down what bothers you. Taste and smell point to carbon. Cloudy water points to sediment. A specific concern, such as a metal, calls for a lab test and a filter certified for that contaminant.
Types compared
| Type | Strength | Trade-off |
|---|---|---|
| Carbon block | Improves taste and smell, simple | Does not remove hardness or many dissolved substances. |
| Sediment plus carbon | Handles particles too | Two cartridges to replace. |
| Reverse osmosis | Wide removal, very clean drinking water | Drain line, storage tank, slower flow. |
| Faucet-mounted | Cheap and portable | Short life, limited flow. |
Look for certification marks from independent testing bodies that match the claims on the box.
Call the 24/7 line and describe the problem. A dispatcher sends a licensed plumber.
What installation involves
- Choose a cabinet location with room to remove the cartridge housing.
- Shut off the cold supply under the sink and relieve the pressure.
- Install a tee or adapter valve on the cold line.
- Mount the filter housing and connect the tubing to the faucet.
- Flush the system as the manufacturer directs, then check for leaks.
Reverse osmosis units also connect to the drain with a saddle clamp and an air gap, and sometimes need a hole in the countertop for a dedicated faucet.
Space and plumbing realities
Under-sink cabinets are crowded with a disposal, traps and cleaning supplies. A reverse osmosis system needs a tank as well. A plumber looks at the space before quoting.
If your kitchen has a disposal, see garbage disposal repair for how it shares the cabinet. If the supply valves under the sink are stuck, replace them at the same time, as covered in faucet and sink repair.
Maintenance schedule
- Replace cartridges on the manufacturer's schedule.
- Write the install date on the housing.
- Sanitize reverse osmosis systems yearly if directed.
- Check the connections twice a year for drips.
- Keep a spare cartridge on hand.
A neglected filter is worse than none, because trapped material can feed bacterial growth. Replace on time.
Whole house or under sink?
If scale on fixtures is the main complaint, a filter will not help. That calls for softening. If you want to improve taste at every tap, a whole-house carbon filter is an option. See water softener and filtration for how to choose.
For a household that mainly wants better drinking water, an under-sink unit is simpler and less costly.
Reading the labels
Filter packaging lists what the product is certified to reduce. Look for the standard number and the specific substances. A filter that says it improves taste is not certified for contaminants.
The flow rate and the cartridge capacity are also on the label. A cartridge rated for a certain number of gallons will clog earlier in water with more sediment.
Costs of ownership
Ask for the yearly cost of replacement parts, not just the unit price.
Leaks and how to avoid them
Most under-sink leaks come from a loose push-fit connection, a cracked housing or an over-tightened fitting. After installation, run a dry paper towel around every joint and check again the next day.
Shut off valves under the sink should be quarter-turn ball valves. Replacing an old one during the install is cheap insurance.
Hooking up a refrigerator ice maker
Many under-sink units can feed a refrigerator line. This needs a tee fitting and a small tube run to the back of the fridge. Check that the filter flow rate is high enough for the ice maker.
Do not run the fridge line through a hole you drill yourself in a wall without checking for pipes and wires. A plumber can route it safely.
What to do with an old filter system
- Shut off the water and relieve pressure first.
- Disconnect the tubing at the quick-connect fittings.
- Cap or reuse the shutoff valve.
- Wipe up any water in the cabinet.
- Dispose of old cartridges according to the maker's guidance.
If you are replacing a system, ask whether the existing tee and valve are reusable. A new valve costs little and prevents future leaks.
Common mistakes
- Buying a filter without knowing the water problem.
- Skipping cartridge changes.
- Installing a reverse osmosis tank without checking cabinet space.
- Over-tightening plastic fittings.
- Ignoring the shutoff valve condition.
A plumber avoids each of these. A short consultation before you buy saves money.
Testing before and after
A TDS meter gives a quick reading of dissolved solids in the water. It is not a safety test, but it shows whether a reverse osmosis membrane is working. Compare readings before and after the filter.
For specific contaminants, send a sample to a certified lab. The lab report tells you what the filter needs to remove. Repeat the test after a few months to confirm the system still performs as expected.
Water differs by town
Not every town draws its water from the same place. West Chicago uses treated groundwater, while Wheaton says it uses Lake Michigan water.
That is why a filter that makes sense in one house may be wasted in another. Know your supply before you choose.
What your village report tells you
Carol Stream's 2025 water quality report says the village buys Lake Michigan water through the City of Chicago and treats it with chlorine, with fluoride at a reported maximum of 0.72 ppm.
The village also states that it has no lead service lines in its system. Fixtures and solder inside a house are separate, so if lead is a concern, ask the plumber about testing and the right filter.
Questions readers ask
Do you install under-sink filters in Carol Stream?
Yes. Tell the dispatcher the model and bring the box.
Does an under-sink filter remove chlorine?
A carbon filter reduces chlorine taste and odor.
Does reverse osmosis waste water?
Yes. It sends some water to the drain while it filters.
Do I need a lab test?
For a specific contaminant concern, yes.
How often do cartridges need changing?
Follow the manufacturer's schedule, often every six to twelve months.
Standards and sources
This guide follows the Illinois Plumbing Code, 77 Ill. Adm. Code 890, and general manufacturer guidelines for the equipment discussed. Local facts come from the Village of Carol Stream, the DuPage Water Commission and the Daily Herald, as named in the text. Product instructions for your own equipment always take priority over general advice.
